TF-800 Suction Oil Filter
Model TF-800
TF pump-inlet suction filter TF-800. 0.6 MPa, 80–180 µm, self-sealing and bypass valves so the tank is not drained for a change.
- Model No. TF-800
- Series TF
- Type Tank-mounted suction filter / strainer
- Flow range (series) 16–1000 L/min
The TF suction filter is a coarse strainer mounted at the pump inlet, protecting the pump and downstream components from the larger debris that enters a reservoir. Model TF-800 is one nominal size of the range.
Construction
The strainer uses glass fibre (domestic or imported), wood-pulp paper or metal mesh on a metal centre tube, sealed with fluororubber or nitrile. It can be mounted on the side, top or bottom of the tank; the housing has a self-sealing valve and a bypass valve, so an element change does not drain the reservoir.
Where it is used
Suction-side protection on hydraulic power packs, machine tools, press and metallurgy lubrication systems, where 80–180 µm filtration is the right compromise between pump protection and pressure drop.
Selection notes
Match the model to the pump inlet flow (16–1000 L/min across the series), keep the working pressure at or below 0.6 MPa, and confirm the mounting type and connection when ordering a complete filter rather than an element.
Other nominal sizes in this range: TF-25, TF-40, TF-63, TF-100, TF-160, TF-250, TF-400, TF-630.
Features
- Coarse protection at the pump inlet — 80 to 180 µm
- Self-sealing valve lets the element be changed without draining the tank
- Bypass valve protects the pump if the element blocks
- Glass fibre, wood-pulp paper or metal mesh on a metal centre tube
- Fluororubber or nitrile seals for mineral oil, emulsion and water-glycol
Typical applications
Hydraulic power units, machine tools, press lines, metallurgy lubrication circuits, mining equipment
Specifications
| Model No. | TF-800 |
|---|---|
| Series | TF |
| Type | Tank-mounted suction filter / strainer |
| Flow range (series) | 16–1000 L/min |
| Working pressure | 0.6 MPa |
| Filtration rating | 80–180 µm (coarse pump protection) |
| Filter media | Glass fibre (domestic / imported) · wood pulp paper · metal mesh |
| Center tube | Metal |
| Seals | Fluororubber (FKM) · nitrile (NBR) |
| Working medium | Hydraulic oil · phosphate-ester fluid · emulsion · water-glycol |
| Working temperature | −30 °C to +110 °C |
Ordering & documentation
Quotations are issued against your operating conditions. Please confirm rated flow (L/min), working pressure (bar/MPa), filtration rating (µm), medium and temperature, plus the housing or reference part number you are replacing. Drawings, material certificates and inspection records are available on request for OEM orders.
Related models
Other elements in the same family
TF-40 Suction Oil Filter
TF pump-inlet suction filter TF-40. 0.6 MPa, 80–180 µm, self-sealing and bypass valves so the tank is not drained for a change.
TF-160 Suction Oil Filter
TF pump-inlet suction filter TF-160. 0.6 MPa, 80–180 µm, self-sealing and bypass valves so the tank is not drained for a change.
TF-63 Suction Oil Filter
TF pump-inlet suction filter TF-63. 0.6 MPa, 80–180 µm, self-sealing and bypass valves so the tank is not drained for a change.
TF-400 Suction Oil Filter
TF pump-inlet suction filter TF-400. 0.6 MPa, 80–180 µm, self-sealing and bypass valves so the tank is not drained for a change.